Questions? Call us at 310-SIGN (7446)

 
 
 

Instant Online Checkout AccountsCustom Safety Tags

News and Blog 310-SIGN Rental Program Get a Customized Quote

 

AER & Saskatchewan Wellsite Signs

Alberta Energy Regulator (AER) & Saskatchewan Oil & Gas Conservation

Alberta Energy Regulator is an independent, quasi-judicial agency of the Government of Alberta.

AER regulates the safe, responsible, and efficient development of Alberta's energy resources: oil, natural gas, oil sands, coal, and pipelines.

Saskatchewan OIL AND GAS CONSERVATION, 2012 O-2 REG 6 The Oil and Gas Conservation Regulations

2012 being Chapter O-2 Reg 6 (effective April 1, 2012) as amended by Saskatchewan Regulations 70/2013

Oil and Gas Conservation Regulations (OGCR) AR 151/1971 and O-2 Reg 6 Section 19

Guide to prominently display at the wellsite conspicuous signage identifying license & operator information together.  Applicable to all well site, wells and facilities, LPG facilities  and oil loading/unloading terminals as if they are facilities in accordance  to OGCR 6.020.

Posting License and Signs

(1) During drilling operations, the licensee shall post and keep prominently displayed at the well site a duplicate of the licence for the well, together with a duplicate of any amendment thereof.

(2) This section applies to all wells and facilities and to LPG facilities and oil loading and unloading terminals as if they were facilities.

(3) The licensee of a well shall identify a well and the operator of a facility shall identify a facility by the use of a conspicuous sign erected at the primary entrance to the well or facility that indicates.

  • (a) the name and telephone number of the licensee or operator, and
  • (b) the legal description of the surface location of the well or facility.

 

(4) Subsection (3) does not apply to a licensee of a well during drilling and initial completion operations.

(5) A licensee or operator shall maintain a sign that is erected pursuant to subsection (3) in a manner that is satisfactory to the Board.

(6) An operator who operates more than one facility at one location may erect one sign to identify all of the facilities at that location.

(7) A licensee who drills more than one well from one surface location shall identify the bottom hole location of each well on a sign affixed to the wellhead.

(8) The licensee of a well or the operator of a facility shall post one of the following categories of warning symbol:

  • (a) Category I: Flammable (gas or liquid); Class 3;
  • (b) Category II: Poison Gas; Class 2.

 

(9) A Category II warning symbol shall be used in the following cases:

  • (a) where a facility handles or a well may produce gas containing .01 moles per kilomole of hydrogen sulphide or greater
  • (b) where the Board so directs; and a Category I warning symbol shall be used in all other cases.

 

(10) Warning symbols must be of the size, design and color shown in Schedule 12.

(11) Warning symbols shall be posted adjacent to all entrances to the developed area of wells and facilities or, for wells and facilities that have no access roads or developed areas, warning symbols shall be posted at the wellhead or facility.

(12) A warning symbol may be posted on a sign that is erected at the primary entrance to a well or facility pursuant to subsection (3).

(13) No licensee or operator may:

  • (a) post warning symbols if a hazard does not exist, or
  • (b) post warning symbols that are not in compliance with this section and Schedule 12.

 

Alberta Pipeline Labeling & Utility Signage (APLUS)

Purpose. The purpose of this standard is to establish specification objectives for performance of the safety signs and labels, on or around well sites, facilities & pipelines during construction, maintenance, operations, installation and associated activities of Alberta's energy resources.

+ Learn more about Alberta Pipeline Labeling & Utility Signage Standards.

Audit & Maintenance of Regulated Signs/Labels

Sign maintenance is an on-going task which should be reviewed regularly to prevent & repair deficiencies. Common issues to watch for when maintaining your regulated signage include:

  • Degraded warning symbols due to sun fading, especially warning in red, which tend to fade faster then other colors.
  • Degraded graphics & text messasges due to peeling, sun fading or weather errosion.
  • Loose hardware bolts & mounting brackets which can become loose from wind vibrations.
  • Firmly planted sign posts and slanting due to seasonal ground freezing & thawing combined with wind.
  • Reviewing & updating regulations such as emergency contacts.

Recommended Material Standards

  • Safety signs & labels should be laminated with UV Protection & Tamper Proof overlay using Heat Assisted Sealing Methods to gain maximum longevity of safety messages.
  • .080 Rust free aluminum or 0.080 coated white enamel aluminum.
  • Should be designed to resist fading and mild chemicals.
  • Vinyl grading should have a lifespan minimum of up to 7 years.

Minimum Effective Viewing Distances

Determining the safe viewing distance of a signage & labeling depends upon many factors, including: Lighting, background, letter type and visual acuity.

Factors In Determining Label Size

The complexity of the message, the reaction time necessary, and the angle the sign will be seen from. In many situations it is better to use multiple safety signs that are strategically positioned instead of one large one which contains multiple messages.

Many times letter size may need to be larger than the values shown on the graphic for a variety of reasons:

  • 1.) To make the label more noticeable from other information displayed in the area, such as Emergency Contacts.
  • 2.) To enable legibility under low light, or other poor viewing conditions. Reflective sheeting can assist.
  • 3.) To alert persons sooner than the minimum safe viewing distance, where hazards may extent visiual boundaries such as explosions or vapours.
  • 4.) To convey special importance for portions of the message.

Text Message Letter Height Examples

* Minimum safe viewing distance refers to the closest distance a person can be to the label/sign and still have time to follow the safety message to avoid and/or react to the hazard.

Minimum Safe Viewing Distance Minimum Letter height for Favorable reading conditions Recommended Letter height for Favorable reading conditions
1 ft or less* 0.8" / 8 points 0.8" / 8 points
2 ft 0.10" / 10 points 0.16" / 16 points
3 ft 0.12" / 12 points 0.19" / 19 points
4 ft 0.14" / 14 points 0.22" / 22 points
5 ft 0.16" / 16 points 0.25" / 25 points
6 ft 0.18" / 18 points 0.28" / 28 points
7 ft 0.20" / 20 points 0.31" / 31 points
8 ft 0.22" / 22 points 0.34" / 34 points

Sign Installation

It is well recognized that in many instances, well designed and properly placed safety labels & signage can increase operator and maintenance personnel awareness of the inherent hazards involved when working.

When installing signs we recommend to keep in mind the following criteria:

  • Sign needs to be readily visible to the target audience.
  • Sign needs to alert the viewer to the hazard upon entering area, in anticipation to take appropriate action.
  • Signs are required to be installed on or adjacent to the area where the hazard is present in accordance is ERCB regulations.
  • Signs are recommended to be permanently installed using approiate gauge sign posts suited for the dimensions of the sign being installed.

 

AR 151/1971 OGCR 6.020 - Schedule 12

Latest